Sensor Modules

ADXL345 GESTURE SENSOR

Robokorda — Mon, 05 Sep 2022 08:30:27 +0000

MR-S-1010
Digital Output: SPI / I2C
Low Power Consumption
Compact Accelemotor / inclinometer
5V/3.3V input support.
PCB Board Size: 28mm x 14 mm
lower pressure drop than the 1117 Onboard RT9161 chip power
ideal for noisy power environment

ADXL345 is a Breakout board for the Analog Device’s ADXL345 triple axis accelerometer. The module is populated with MOSFET based Voltage level conversion circuitry to enable you to interface different type of microcontrollers (3V3 & 5V).

LM 35 Heat Sensor

Robokorda — Mon, 05 Sep 2022 08:24:42 +0000

MR-S-1009
Calibrated directly in Degree Celsius (Centigrade)
Linear at 10.0 mV/°C scale factor
0.5°C accuracy guarantee-able (at a25°C)
Suitable for remote applications
Low cost due to wafer-level trimming
Operates from 4 to 30 volts
Less than 60 mA current drain
Low self-heating, 0.08°C in still air
Non-linearity only 0.25°C typical
Low impedance output, 0.1Ωfor 1 mA load

The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade) temperature.

IR Module

Robokorda — Mon, 05 Sep 2022 08:19:41 +0000

MR-S-1008
5VDC Operating voltage
I/O pins are 5V and 3.3V compliant
Range: Up to 20cm
Adjustable Sensing range
Built-in Ambient Light Sensor
20mA supply current
Mounting hole”

The IR Sensor module has great adaptive capability of the ambient light, having a pair of infrared transmitter and the receiver tube, the infrared emitting tube to emit a certain frequency, encounters an obstacle detection direction (reflecting surface), infrared reflected

DHT22 Humidity Sensor

Robokorda — Mon, 05 Sep 2022 07:56:02 +0000

MR-S-1007
Color: White
Infrared Sensor with Control Circuit Board
The Sensitivity and Holding Time Can be Adjusted
Working Voltage Range: DC 4.5V- 20V
Current Drain: <60uA Detection Range: <140° DHT11 is a Humidity and Temperature Sensor, which generates calibrated digital output. DHT11 can be interface with any microcontroller like Arduino, Raspberry Pi, etc. and get instantaneous results.

MQ-2 GAS SENSOR Module

Robokorda — Mon, 05 Sep 2022 07:49:40 +0000

MR-S-1006
Power Supply: 5 Volts
Interface Type: Analog & Digital
High Sensitivity to Smoke & combustible gasses like Hydrogen, LPG & Propane.
Low Cost.
Stable & Long Life.
On board Power indication.

It is a very easy to use low cost semiconductor Gas sensor Module with analog and digital output. It requires no external components just plug in Vcc & ground pins and you are ready to go.

Microphone Module

Robokorda — Mon, 05 Sep 2022 07:45:07 +0000

MR-S-1005
IC Chip: LM393
Operating Voltage(VDC): 3.3 to 5
Operating Distance: 0.5 Meter
Length (mm) : 43
Width (mm): 17
Height (mm): 8
Weight (gm): 3

Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino is a Single channel signal output Sensor.

HC-SR501 PIR Module

Robokorda — Mon, 05 Sep 2022 07:32:40 +0000

MR-S-1004
Color: White
Infrared Sensor with Control Circuit Board
The Sensitivity and Holding Time Can be Adjusted
Working Voltage Range: DC 4.5V- 20V
Current Drain: <60uA Detection Range: <140° The Passive Infrared Sensor (PIR) sensor module is used for motion detection. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor.

LDR Module

Robokorda — Mon, 05 Sep 2022 07:27:48 +0000

MR-S-1003
Diameter: 3mm
No. of Pins: 2
Type of Mounting: PCB Through Hole
Maximum Operating Temperature: +80°C (Approx.)
Dark resistance:1-20 Mohm

The LDR Sensor Module is used to detect the presence of light / measuring the intensity of ligh

HC-SR04 Ultrasonic sensor

Robokorda — Mon, 05 Sep 2022 07:15:48 +0000

MR-S-1002
Sensor Type: Ultrasonic
Output: Digital Sensor
Voltage: 5VDC
Detection distance: 2cm-400cm (0.02M – 4.0M)
Static current: < 2mA Level output: high-5V High precision: up to 0.3cm

HC-05 Bluetooth Module

Robokorda — Sat, 13 Aug 2022 14:13:14 +0000

MR-S-1001
Bluetooth protocol: Bluetooth Specification v2.0+EDR
Frequency: 2.4GHz ISM band
Modulation: GFSK(Gaussian Frequency Shift Keying)
Emission power: ≤4dBm, Class 2
Sensitivity: ≤-84dBm at 0.1% BER
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Security: Authentication and encryption
Power supply: +3.3VDC 50mA”